How To Measure Trampoline

Jun. 09, 2021

As the trampoline becomes more and more popular with everyone, many people want to know their trampoline size so that it is easy to replace some accessories and ensure the life of the trampoline.

How to measure trampoline size?

Common parts that need to be measured: trampoline diameter, spring length, trampoline size, etc.

Step 1: Measure the diameter of the steel frame

Find your trampoline diameter by measuring the steel frame from the outer edge to the opposite outer edge.

Measure directly to the outside metal edge of the trampoline opposite, and then measure the frame diameter again, but perpendicular to the position you just measured. The average of these two measurements is the approximate size of your trampoline frame, which you can round to the nearest foot. Do not measure your mat, as trampoline MATS stretch over time.

Trampoline Size

Step 2: Count the number of V-rings on the old mat

It is easy to make mistakes when counting the number of V-rings on a trampoline mat. To better calculate and save you time, you'd better mark the starting point. The total number of V-rings on a trampoline mat can usually be divided by 12, for example, 72 and 96, sometimes incorrectly. You can repeat this process 2 or 3 times to ensure the accuracy of the measured quantity.

Step 3: Measure the spring length

Remove at least 3 springs from the trampoline and measure them from hook to hook. The average of these three springs is the length of your spring. When measuring the spring should be in a natural state, there is no deformation, otherwise, the cushion will be a premature tear or the new cushion is very loose, bounce performance is not good.

Trampoline Size

How to order the right parts for a circular trampoline:

1. For round trampoline mats on surfaces:

1) Frame diameter size

2) Number of springs

3) The length of the spring (measuring the spring of the trampoline OFF, unstretched, hook end to hook end)

With these measurements, you can find the right mat for your trampoline.


2. For spring cover cushions: In order to get the right cushions, you need to know:

1) Frame diameter size (measured from the outer edge of the metal frame to the opposite outer edge)

2) Measure the width of your old pad

Usually, the frame is close to an even foot mass (8 ', 10 ', 12 ', etc.), so as long as it is under 2 ', for example, a trampoline measuring 12 '10' can use a 13 'spring mat.


3. For the replacement shell mesh: In order to get the correct replacement shell mesh, you need to know:

1) Frame diameter size (measured from the outer edge of the metal frame to the opposite outer edge)

2) Calculate how many poles or arches are on your trampoline fence.


4. For housing systems (including nets, rods, and hardware): To get the correct housing system, you need to know:

1) Frame diameter size (measured from the outer edge of the metal frame to the opposite outer edge)

2) Check the legs of the trampoline. The enclosure system requires "U" shaped legs to connect.

We hope this article will be helpful for you to further measure trampoline size dimensions.

WeChat

WhatsApp

Skype

E-mail